Inside Dell Latitude 14 3410 – disassembly and upgrade options

Here, we see a business notebook with decent upgrade options. Take a look.

Check out all Dell Latitude 14 3410 prices and configurations in our Specs System or read more in our In-Depth review.


1. Remove the bottom plate

To get inside of this machine, you need to undo 8 captive Phillips-head screws. After that, pry the bottom panel with a plastic tool, and lift it away.


2. Battery

So, apart from the 53Wh unit we have in our device, there is an iteration with a smaller 40Wh battery pack.


3. Memory and storage

In terms of upgradeability, we are happy to see a couple of SODIMM slots, that can fit up to 32GB of DDR4 memory, working at 2400 or 2667 MHz, depending on the processor choice. Storage-wise you get one M.2 PCIe x4 slot. If you get the laptop with the smaller 40Wh battery pack, you will also be able to put a 2.5-inch SATA drive.


4. Cooling system

Here, we see an orthodox cooling solution, which includes a heat pipe, a rather narrow heat sink, as well as a medium-sized fan.

Check out all Dell Latitude 14 3410 prices and configurations in our Specs System or read more in our In-Depth review.

Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments