Inside HP Omen 15 2020 (15-ek0000) – disassembly and upgrade options

The new HP Omen 15 looks really fresh on the outside. How does it look on the inside?

Check out all HP Omen 15 2020 (15-ek0000) prices and configurations in our Specs System or read more in our In-Depth review.


1. Remove the bottom plate

To get inside this notebook, you have to undo 8 Phillips-head screws. Ultimately, this is an easy job to do, and prying the bottom panel is not harder at all.


2. Battery

In terms of power away from the grid, there is a 71Wh unit.


3. Memory and storage

Memory-wise, there are two RAM SODIMM slots, which work in dual-channel mode and we are pretty confident that they can hold 64GB of DDR4 RAM in total. As far as the storage is concerned, there are two M.2 NVMe slots, both of which support PCIe x4 drives as well as Optane drives.


4. Cooling system

Lastly, there is the cooling solution. It comprises two heat pipes shared between the CPU and the GPU. Additionally, you’ll find a third one with a smaller diameter, attached only to the GPU, and heading to its own tiny heat sink. And as you can see, all of the VRMs and graphics memory modules are hidden beneath a heat spreader, so there should be no overheating problems with them, whatsoever.

Check out all HP Omen 15 2020 (15-ek0000) prices and configurations in our Specs System or read more in our In-Depth review.

Subscribe
Notify of
guest
4 Comments
Inline Feedbacks
View all comments
Berner
Berner
3 years ago

Where is the HDD?

Sprtn
Sprtn
3 years ago
Reply to  Berner

No HDD slot

Michal
Michal
3 years ago
Reply to  Sprtn

But is there a second slot for SSD?

Jacob
Jacob
3 years ago
Reply to  Michal

The only storage options are two M.2 slots.